Please use this identifier to cite or link to this item: https://rima.ufrrj.br/jspui/handle/20.500.14407/3165
Tipo do documento: TCC
Title: Análise não destrutiva da qualidade da madeira de Virola bicuhyba (Schott ex Spreng.) Warb. e Virola gardneri (A. DC.) Warb.
Authors: Miranda, Everton Fernandes
Carvalho, Alexandre Monteiro de
Carvalho, Alexandre Monteiro de;Vanini, Andréa;Pace, José Henrique Camargo
Keywords: Mata Atlântica;Propriedades da madeira;Espécies nativas;Propriedades tecnológicas da madeira
Issue Date: 7-Jul-2017
Abstract: A pesquisa foi realizada na Estação Biológica Fiocruz Mata Atlântica (EFMA), situada na regi-ão de Jacarepaguá, Zona Oeste da cidade do Rio de Janeiro. O objetivo deste trabalho foi avali-ar o potencial para fins madeireiros das espécies Virola bicuhyba e Virola gardneri, através da análise da qualidade da madeira por métodos não destrutivos. Para isso foram selecionados dez indivíduos de Virola bicuhyba (Schott ex Spreng.) Warb. e Virola gardneri (A. DC.) Warb., estes foram separados em duas classes diamétricas (classe I árvores com diâmetro menor ou igual a 35 cm e classe II árvores com diâmetro maior que 35 cm medidos a 1,30 m do solo). Foram realizadas as determinações das variáveis dendrométricas, análise de resistografia e ex-tensometria e, com o material obtido através do trado de incremento, foi obtida a densidade básica em adequação aos procedimentos descritos pela ABNT NBR 7190:1997. Ressalta-se que para o uso do trado de incremento, dentre as dez árvores amostradas para cada espécie, foram selecionados três indivíduos para a classe I e três indivíduos para a classe II, totalizando seis indivíduos de Virola bicuhyba e seis indivíduos de Virola gardneri. As determinações dendro-métricas apontaram que a Virola gardneri mostrou maiores diâmetros a altura do peito, altura total e comercial, quanto ao número de fustes e nós os resultados foram semelhantes. A avalia-ção quanto a qualidade do fuste e ramificação demonstraram potencial para o segmento move-leiro. Para Virola bicuhyba e Virola gardneri foram encontrados, respectivamente, os seguintes resultados médios: densidade básica 0,41 e 0,43 g/cm³, deformação residual longitudinal (DRL) 0,062 e 0,049 mm e amplitude dê resistência à penetração da agulha 15,01 e 18,89%. Porém, as médias de amplitude da classe II (maior diâmetro) e o indivíduo médio, comparado entre as duas espécies, apresentaram diferença estatística significativa ao nível de 5 % de significância. Os resultados de densidade básica, resistografia e DRL para as espécies Virola bicuhyba e Vi-rola gardneri, os mesmos não apresentaram correlações a 5% de significância. Pode-se conclu-ir que a qualidade da madeira da espécie estudada demonstrou potencial para a indústria madei-reira a partir das análises não destrutivas realizadas.
Abstract: The research was realized at the Campus Fiocruz Mata Atlântica (CFMA), located in Jacarep-aguá, west zone of the city of Rio de Janeiro, Brazil. The objective was to evaluate the quality of wood and potential of the species Virola bicuhyba and Virola gardneri through the analysis using non-destructive methods. Ten individuals of Virola bicuhyba and ten of Virola gardneri were selected. They were separated into two diametric classes (class I, trees with diameter less than or equal to 35 cm and class II, trees with a diameter greater than 35 cm measured at breast height). The determination of the dendrometric variables, analysis of resistographic amplitude and extensometry were carried out and, with the material obtained through the Pressler probe (trado de incremento), the basic density was obtained in compliance with the procedures de-scribed by ABNT NBR 7190: 1997. It should be pointed out that for the use of the increment tree, among the ten trees sampled for each species, three individuals within each diameter class were selected, totaling six individuals of Virola bicuhyba and six individuals of Virola gard-neri. The results of the dendrometric determinations showed that the Virola gardneri showed higher diameters of chest height, total and commercial height, as for the number of stems and we the results were similar. The assessment of the stem quality and branching demonstrated the potential for the furniture segment. The following average results were found for Virola bicuhyba and Virola gardneri, respectively: basic density 0,41 and 0,43 g/cm³, longitudinal residual deformation (LRS) 0,062 and 0,049 mm and range of resistance to penetration of nee-dle 15,01 and 18,89%. However, the mean amplitude of class II (largest diameter) and the av-erage individual, compared between the two species, showed a significant statistical difference at the 5% level of significance. The results of basic density, resistographic analysis and LRS for the species Virola bicuhyba and Virola gardneri, did not present correlations to 5% of signifi-cance. It can be concluded that the quality of the wood of the species studied demonstrated po-tential for the timber industry from the nondestructive analyzes carried out.
URI: https://rima.ufrrj.br/jspui/handle/20.500.14407/3165
Appears in Collections:TCC - Engenharia Florestal

Se for cadastrado no RIMA, poderá receber informações por email.
Se ainda não tem uma conta, cadastre-se aqui!

Files in This Item:
File Description SizeFormat 
Monografia - Everton Fernandes versão final.pdf1.76 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.